Use these guides when the question is not only “what is the number?” but “how do I select, validate and use the number?”
Guide library
Build a CNC Feed & Speed Starting Point
Start with toolmaker data, calculate the machine values, then validate engagement and machine limits.
How to Read a Feed & Speed Chart
A chart is source data, not a universal recipe. This guide shows how to read units, tool type, material grade and applicability.
CNC Chatter Troubleshooting Guide
A practical sequence for separating rigidity, tool stick-out, engagement and cutting-condition problems.
CNC Drilling Setup Guide
A drilling workflow covering RPM, feed per revolution, depth, chip evacuation, coolant and peck strategy.
CNC Tapping Setup Guide
A tapping workflow covering pitch, hole preparation, synchronized feed and lubrication.
How to Document a Proven CNC Cutting Condition
Turn a successful cut into reusable shop knowledge without confusing it with generic calculator output.
Core workflow
- Define operation, tool and material.
- Read the applicable manufacturer data.
- Calculate the required machine values.
- Check engagement, rigidity, coolant and machine limits.
- Run a controlled test.
- Document the result.